Mass Portal D Series | Prirevo
18990
page-template,page-template-full_width,page-template-full_width-php,page,page-id-18990,page-child,parent-pageid-15806,ajax_fade,page_not_loaded,,columns-4,qode-theme-ver-11.0,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive

Mass Portal D Series

Mass Portal D Series

Professional desktop and standalone 3D printers

 Next generation plastic part production tools.

D 100

D 200

D 300

D 400

D 400 Dual Dryer

Build volume (mm):

Ø 100  x 200

Ø 200  x 200

Ø 300 x 300

Ø 400 x 400 Ø 400 x 400
Nozzle diameter:

0,2 mm

0,4 mm

0,4 mm

 0,4 mm  0,4 mm
Printer size – w / d / h (mm):
340 x 370 x 641 340 x 370 x 641 480 x 620 x 855  755 x 770 x 1775  755 x 770 x 1775

EXTRUSION SYSTEM

Dual nozzle Bowden system
All-metal hotend and feeder
Extrusion temperature up to 475 °C

BUILD CHAMBER

Enclosed, thermally insulated, heated chamber
Quick-release glass printbed
Printbed heating up to 120 °C

Luft- & Raumfahrt

Architektur

Automobilindustrie

Handelsgüter

Bildungswesen

Medizin

Support und Service

  • Professionelle Beratung
  • Musterdruck Erstellung
  • Individuelle Pakete für Industriekunden
  • Einschulung vor Ort
  • Servicepaket mit kostenlosem Telefon- und Email Support
  • Gesamtlösung mit Waschstation
  • Bauteiloptimierung via Fernwartung
  • Materialversuche
  • Prozessoptimierungen
  • Kundenspezifische Seminare vor Ort
  • Vor Ort Service
Wir freuen uns auf Ihre Anfrage!

Technische Daten

MASS PORTAL D100 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 100 mm x 200 mm
Build chamber
enclosed, thermally insulated
Build chamber door
tempered glass
Build chamber temperature
room temperature – 50°C
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
1.5, 1.5, 5 micron
Ultimate layer resolution
70 micron (0.2-mm nozzle)*
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
liquid cooled
Rod ends
heat-resistant precision rod ends
Heater
four resistive heaters
Nozzle temperature
75 – 475 °C
Nozzle heatup time
< 5 min
Nozzle inner diameter
0.2 mm (supplied), 0.4 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
compressed air
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
Max. 1080 W
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Door safety switch
yes
Overheating protection
yes
Type
filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 475 °C (ABS, ASA, BVOH ,CPE, HIPS, PA (Nylon), PC, PEI, PEEK, PET, PETG, PLA, PMMA, POM, PP, PPSU, PVA, PVB, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
340 mm x 370 mm x 641 mm
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software) cloud-based FabCloud™ (printing, drying profile management software) FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL D200 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 200 mm x 200 mm
Build chamber
enclosed, thermally insulated
Build chamber door
tempered glass
Build chamber temperature
room temperature – 50°C
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
2, 2.5 micron
Ultimate layer resolution
100 micron (0.4-mm nozzle)*
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
liquid cooled
Rod ends
heat-resistant precision rod ends
Heater
four resistive heaters
Nozzle temperature
75 – 475 °C
Nozzle heatup time
< 5 min
Nozzle inner diameter
0.4 mm (supplied), 0.6 – 1.4 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
compressed air
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
Max. 1080 W
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Door safety switch
yes
Overheating protection
yes
Type
filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 475 °C (ABS, ASA, BVOH ,CPE, HIPS, PA (Nylon), PC, PEI, PEEK, PET, PETG, PLA, PMMA, POM, PP, PPSU, PVA, PVB, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
340 mm x 370 mm x 641 mm
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software) cloud-based FabCloud™ (printing, drying profile management software) FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL D300 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 300 mm x 300 mm
Build chamber
enclosed, thermally insulated
Build chamber door
tempered glass
Build chamber temperature
room temperature – 50°C
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
6, 6.5 micron
Ultimate layer resolution
150 micron (0.4-mm nozzle)*
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
liquid cooled
Rod ends
heat-resistant precision rod ends
Heater
four resistive heaters
Nozzle temperature
75 – 475 °C
Nozzle heatup time
< 5 min
Nozzle inner diameter
0.4 mm (supplied), 0.6 – 1.4 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
compressed air
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
Max. 1080 W
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Door safety switch
yes
Overheating protection
yes
Type
filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 475 °C (ABS, ASA, BVOH ,CPE, HIPS, PA (Nylon), PC, PEI, PEEK, PET, PETG, PLA, PMMA, POM, PP, PPSU, PVA, PVB, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
480 mm x 620 mm x 855 mm
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software), cloud-based FabCloud™ (printing, drying profile management software), FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL D400 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 400 mm x 400 mm
Build chamber
enclosed, thermally insulated
Build chamber door
tempered glass
Build chamber temperature
room temperature – 80°C
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
6, 6.5 micron
Ultimate layer resolution
150 micron (0.4-mm nozzle)*
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
liquid cooled
Rod ends
heat-resistant precision rod ends
Heater
four resistive heaters
Nozzle temperature
75 – 475 °C
Nozzle heatup time
< 5 min
Nozzle inner diameter
0.4 mm (supplied), 0.6 – 1.4 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
compressed air
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
Max. 1080 W
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Door safety switch
yes
Overheating protection
yes
Type
filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 475 °C (ABS, ASA, BVOH ,CPE, HIPS, PA (Nylon), PC, PEI, PEEK, PET, PETG, PLA, PMMA, POM, PP, PPSU, PVA, PVB, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
755 mm x 770 mm x 1775 mm
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software), cloud-based FabCloud™ (printing, drying profile management software), FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL D400 Dual Dryer anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 400 mm x 400 mm
Build chamber
enclosed, thermally insulated
Build chamber door
tempered glass
Build chamber temperature
room temperature – 80°C
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
6, 6.5 micron
Ultimate layer resolution
150 micron (0.4-mm nozzle)*
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
liquid cooled
Rod ends
heat-resistant precision rod ends
Heater
four resistive heaters
Nozzle temperature
75 – 475 °C
Nozzle heatup time
< 5 min
Nozzle inner diameter
0.4 mm (supplied), 0.6 – 1.4 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
compressed air
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
Max. 1080 W
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Door safety switch
yes
Overheating protection
yes
Type
filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 475 °C (ABS, ASA, BVOH ,CPE, HIPS, PA (Nylon), PC, PEI, PEEK, PET, PETG, PLA, PMMA, POM, PP, PPSU, PVA, PVB, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Filament dryers
Compatibility
open material“ spools up to 1 kg
Filament dryers Spool size (diameter x width):
200 mm x 80 mm
Printer size (w x d x h)
755 mm x 770 mm x 1775 mm
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software), cloud-based FabCloud™ (printing, drying profile management software), FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode