Mass Portal XD Series | Prirevo
19027
page-template,page-template-full_width,page-template-full_width-php,page,page-id-19027,page-child,parent-pageid-15806,ajax_fade,page_not_loaded,,columns-4,qode-theme-ver-11.0,qode-theme-bridge,wpb-js-composer js-comp-ver-5.1.1,vc_responsive

Mass Portal XD Series

Mass Portal XD Series

Desktop 3D printers

High quality. High performance. High resolution.

XD 10

XD 20

XD 30

Build volume (mm):

Ø 100 x 200

Ø 200 x 200

Ø 300 x 300

Nozzle diameter:

0,2 mm

0,4 mm

0,4 mm

Printer size – w / d / h (mm):
340 x 370 x 641 340 x 370 x 641 425 x 470 x 855

EXTRUSION SYSTEM

Single-feed Bowden tube
All-metal hotend and feeder
Extrusion temperature up to 300 °C

BUILD CHAMBER

Enclosed, illuminated chamber
Removable heated glass printbed
Printbed heating up to 120 °C

Luft- & Raumfahrt

Architektur

Automobilindustrie

Handelsgüter

Bildungswesen

Medizin

Support und Service

  • Professionelle Beratung
  • Musterdruck Erstellung
  • Individuelle Pakete für Industriekunden
  • Einschulung vor Ort
  • Servicepaket mit kostenlosem Telefon- und Email Support
  • Gesamtlösung mit Waschstation
  • Bauteiloptimierung via Fernwartung
  • Materialversuche
  • Prozessoptimierungen
  • Kundenspezifische Seminare vor Ort
  • Vor Ort Service
Wir freuen uns auf Ihre Anfrage!

Technische Daten

MASS PORTAL XD10 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 100 mm x 200 mm
Build chamber
open or enclosed
Build chamber illumination
yes
Build chamber ventilation
two intake, two exhaust fans
Motion system
precision miniature linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extrusion type
Bowden tube
Feeder type
custom-designed dual grip feeder
XYZ accuracy
1.5, 1.5, 5 micron
Ultimate layer resolution
70 micron (0.2-mm nozzle)*
Noise level
56 dBA
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
fan
Rod ends
heat-resistant precision rod ends
Heater
two resistive heaters
Nozzle temperature
75 – 300 °C
Nozzle heatup time
< 2 min
Nozzle inner diameter
0.2 mm (supplied), 0.4 mm – 1.0 mm
Deposition speed
< 1 mm3/s (0.2 mm nozzle)
Printed part cooling
3 fans
Type
quick-release glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
max. 465 W, 220 VAC, 2.2 A, 50-60 Hz
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Material type
thermoplastic filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 300 °C (ABS, ASA, CPE, HIPS, PA (Nylon), PC, PET, PETG, PLA, PMMA, POM, PP, PVA, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
340 mm x 370 mm x 641 mm, 340 mm x 390 mm x 641 mm (with spool holder)
Weight
22.5 kg
Shipping dimensions (w x d x h)
400 mm x 400 mm x 760 mm
Shipping weight
30 kg
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software) cloud-based FabCloud™ (printing, drying profile management software) FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL XD20 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 200 mm x 200 mm
Build chamber
open or enclosed
Build chamber illumination
yes
Build chamber ventilation
two intake fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extruder type
Bowden tube
Feeder
custom-designed dual grip feeder
XYZ accuracy
2, 2.5 micron
Ultimate layer resolution
100 micron (0.4-mm nozzle)*
Noise level
56 dBA
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal dual nozzle
Printhead cooling
fan
Heater
two resistive heaters
Nozzle temperature
75 – 300 °C
Nozzle heatup time
< 2 min
Nozzle inner diameter
0.4 mm (supplied), 0.2 mm – 1.0 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
3 fans
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
max. 465 W, 220 VAC, 2.2 A, 50-60 Hz
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Material type
thermoplastic filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 300 °C (ABS, ASA, CPE, HIPS, PA (Nylon), PC, PET, PETG, PLA, PMMA, POM, PP, PVA, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
340 mm x 370 mm x 641 mm, 340 mm x 390 mm x 641 mm (with spool holder)
Weight
22.5 kg
Shipping dimensions (w x d x h)
400 mm x 400 mm x 760 mm
Shipping weight
30 kg
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software) cloud-based FabCloud™ (printing, drying profile management software) FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode
MASS PORTAL XD30 anzeigen
Technology
Fused Filament Fabrication (FFF)
Build volume (Ø x h)
Ø 300 mm x 300 mm
Build chamber
open or enclosed
Build chamber illumination
yes
Build chamber ventilation
two intake fans
Motion system
precision linear guideways
Frame
rigid aluminium frame
Maximum printhead travel speed
250 mm/s
Electronics
32-bit
Firmware
open-source Repetier-Firmware
Extruder type
Bowden tube
Feeder
custom-designed dual geared grip feeder
XYZ accuracy
6, 6.5 micron
Ultimate layer resolution
150 micron (0.4-mm nozzle)*
Noise level
56 dBA
Remote monitoring
built-in HD camera
Connectivity
USB 2.0 and Ethernet jacks, Wi-Fi
Automation ready
yes (software interfaces)
Printhead
all-metal Mass Portal Pharaoh
Printhead cooling
fan
Heater
two resistive heaters
Nozzle temperature
75 – 300 °C
Nozzle heatup time
< 2 min
Nozzle inner diameter
0.4 mm (supplied), 0.2 mm – 1.0 mm
Deposition speed
< 5 mm3/s (0.4 mm nozzle)
Printed part cooling
3 fans
Type
glass plate
Temperature range
room temperature – 120 °C
Heatup time
5 min
Power requirements
max. 565 W, 220 VAC, 2.6 A, 50-60 Hz
Regulatory compliance
CE, WEEE
Air filtering
HEPA & active carbon filters
Material type
thermoplastic filament
Filament diameter
1.75 mm
Supported nozzle materials
“open material” with softening/melting temperature below 300 °C (ABS, ASA, CPE, HIPS, PA (Nylon), PC, PET, PETG, PLA, PMMA, POM, PP, PVA, TPE, TPU, as well as filled filaments)
Hardness
85 A Shore
Printer size (w x d x h)
425 mm x 470 mm x 855 mm, 425 mm x 490 mm x 855 mm (with spool holder)
Weight
40 kg
Shipping dimensions (w x d x h)
720 mm x 800 mm x 1200 mm
Shipping weight
70 kg
Operating ambient temperature
15-35 °C, 10-90 % RH
Supplied software
Simplify3D™ (slicer and control software) cloud-based FabCloud™ (printing, drying profile management software) FabControl® (printer control software)
Supported OS
Linux, MacOS, Windows
Supported 3D models file format
.stl, .obj, .3mf
Supported print file format
.gcode