The Extreme 1500 PRO is one of the biggest FDM 3D printers available. With a build volume of 1100x500x820 mm, it allows you to print extremely long and large prototypes/objects. The Builder Extreme comes with many features such as a 7 inch touch display, heated bed, filament detection and an integrated ups system – resume after power outage. These features make large scale 3D printing worry free.
The Extreme 1500 PRO has a huge print volume but due to the smaller Y axis, it’s able to fi t through every door and can be placed in a room with very little space.
The Builder Extreme 1500 PRO comes with a versatile Dual-Feed extruder. The extruder is able to print Dual color/material objects, but can also be used as a Mono extruder. Insert 2 spools of the same color, change the extruder ratio of both motors to 50% and the Dual becomes a Mono extruder. You can even use the Dual- Feed extruder to print color mixed objects as the extruder has 1 nozzle.
Industrial 3D printers are large and not mobile at all, but the Extreme 1500 PRO has 4 wheels on the bottom of the printer so it can be moved to the next department/location if needed.
Print volume |
1100 x 500 x 820 mm (XYZ) |
Extruder |
Dual-Feed (one nozzle) |
Control with |
7 inch touch display |
Print speed |
10 – 100 mm p/s |
Color mix software |
Mixing colors |
Camera |
On-board |
Wi-Fi |
WiFi / Ethernet |
Software |
Simplify3D |
Outside dimensions without box |
151 x 79 x 155 cm (LxWxH) |
Outside dimensions with box |
165 x 85 x 1800 cm (LxWxH) |
Weight |
225 kg (without filaments) |
Housing |
Fully closed |
Print bed |
Heated glass (60 degrees) |
Nozzle |
0.4, 0.8, 1.2 mm (delivered with the Extreme) |
Nozzle temperature |
Max. 260 degrees |
Print material |
PLA, PET, PVA, Woodfill Bronzefill, Flexible filaments |
Stand-alone |
USB Stick |
Filament detection |
Integrated |
Print bed |
Semi-automatic bed leveling |
Ups system |
Resume after power outage |
Remove Extreme from pallet |
To remove the Extreme from the pallet, you need a forklift truck. |